OM10 ppm Oxygen Analyser for Weld Gas
The OM10 is the state of the art, easy to use ppm Oxygen Monitor for weld gas.It has an extremely fast response and a very high accuracy from 1ppm to 100% measurement. Ideal for use in welding enclosures/gloveboxes.
The analyser is the preferred standard for monitoring Oxygen in Arc welding gas, whether working with Stainless Steel, Duplex, Titanium or other high alloy steel. The OM10 achieves this without compromising on simplicity or sturdiness.
Oxygen Sensor Specification
- O2 sensor range: 1ppm to 100%
- O2 sensor accuracy: ±1% of reading
- O2 sensor response time: Approximately 5 sec for a 90% step change
- O2 sensor life expectancy: 17,500 hours
- Pump flow rate: 0-1 litres per minute, user selectable
- Max gas inlet temperature: 60°C
- Max inlet pressure:1 Bar gauge
For routine gas measurements see OM5 Weld check Oxygen Monitor.
Monitor Specification
- Operating temperature: 5°C to 35°C
- Warm up time: 3-4 minutes at 20°C
- Voltage: 90-260VAC, 50/60Hz
- Voltage outputs: 0-10V linear, user programmable
- Current outputs: 4-20mA linear, user programmable
- Digital outputs:RS232 (RS485 option available)
- Calibration: Requires 2 or 3 user selectable gas mixtures
- Sample connections: 4mm ID / 6mm OD nipple typeGas fittings on the rear
- Display:16 x 2 character (9mm) back-lit LCD
- Analyser dimensions: 250mm x 263mm x 150mm
- Weight: 3.5 kg
Applications
- Glove box welding environments
- Low Oxygen critical welding
- Titanium welding
- Inert gas
- Aerospace welding
- Medical device manufacture
- Electronics encapsulation